€6.97

FEATURES: For holding workpieces whilst soldering or welding. Working angles: 30°, 45°, 75° and 90°. Manufactured from high quality pressed and enamelled steel with strong magnet. Dimensions 95 x 13 x 65mm BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...

€25.95

FEATURES: For holding workpieces whilst soldering or welding. Working angles: 30°, 45°, 75° and 90°. Manufactured from high quality pressed and enamelled steel with strong magnet.Dimensions 95 x 13 x 65mm View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...

€11.95

Time saving magnetic tools for use in the workshop.Specification3 separate magnetic areasIdeal help tool for welding workPrecise fixing of steel and workpieceTriple use 60°, 90° and 120°Gross weight 340 g BGS technic KG, a traditional German, family-owned, owner-managed company, has been offering a constantly growing selection of hand tools and special automotive tools for over 45 years...

€6.95

useful for aligning and welding metal sheetsWidth 43 mmGross weight 450 gHeight 11 mmLength 72 mm BGS technic KG, a traditional German, family-owned, owner-managed company, has been offering a constantly growing selection of hand tools and special automotive tools for over 45 years...

€4.95

8 separate magnetic areasideal help tool for welding workprecise fixing of steel and workpiecedouble use 45°, 90° and 135°Width 15 mmGross weight 328 gHeight 82 mmLength 120 mm..

€5.95

8 separate magnetic areasideal help tool for welding workprecise fixing of steel and workpiecedouble use 45°, 90° and 135°Width 20 mmGross weight 640 gHeight 105 mmLength 155 mm..

€9.95

 separate magnetic areasWidth 25 mmGross weight 1070 gHeight 125 mmLength 190 mm BGS technic KG, a traditional German, family-owned, owner-managed company, has been offering a constantly growing selection of hand tools and special automotive tools for over 45 years...

€6.64

For holding workpieces whilst soldering or welding. Working angles: 45°, 75° and 135°. Manufactured from high quality pressed and enamelled steel with strong magnet. ..

€9.74

For holding workpieces whilst soldering or welding. Working angles: 45°, 75° and 135°. Manufactured from high quality pressed and enamelled steel with strong magnet. ..

€32.24

The Faithfull Adjustable Magnetic Welding Clamp, also known as an 'adjustable links magnet', is a type of welding clamp where each magnet can be completely rotated. The 2 magnets can be adjusted to hold ferrous metal workpieces at any angle by tightening/loosening the wing nuts. The compact size allows it to be used in confined spaces. Ideal for use by welders and fabricators.Magnetic Block Size: 50 x 25mmOverall Size: 114 x 25 x 50mm..

€12.90

The Faithfull Magnetic Multi-Angle Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. The clamp contains a strong magnet and features angled edges for precise alignment of metal workpieces. It will securely hold round and square tubing, angle and flat stock. Through-holes enable multiple clamps to be fixed together when working on larger projects. Ideal for use by welders and fabricators.Achievable Angles: 30°, 45°, 60°, 75°, 90°, 105°, 120° & 135°Siz..

€22.56

The Faithfull Magnetic Square Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. The clamp contains a strong magnet and features angled edges for precise alignment of metal workpieces. It will securely hold round and square tubing, angle and flat stock. Through-holes enable multiple clamps to be fixed together when working on larger projects. Ideal for use by welders and fabricators.Achievable Angles: 45°, 90° & 135°Pull Power: 20kgSize: 100 x 95 x 19..

€13.49

The SIP 'L' Model Magnetic Holder allows for easy and secure positioning or fixing of materials prior to and during welding or metalwork. Available as L, or an M edition which supports 50lb.Heavy-duty design which easily secures and fixes up to 75lb max. weight capacityManufactured with a quality all-metal designSIP Industrial are machinery specialists, with the SIP catalogue of products including welding, metalwork, air compressors and tools, power, cleaning, charging, heating, automotive, and ..

€15.95

Hold Metal at 90º For Welding and Fabrication!Hold stock from the outside when inside access is difficult.Hold and position sheet metal, round pipes, square, angled or flat stock.The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces.Use hex hole on magnet for breakaway leverage.SpecificationFixed Angle, 90º, 30º/60ºHeight (in) 6.0Width (in) 4.3Thickness (in)..

€22.95

Hold Metal at 30º - 270º For Welding and Fabrication!Hold stock from the outside when inside access is difficult.Hold and position sheet metal, round pipes, square, angled or flat stock.The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces.Use hex hole on magnet for breakaway leverage.SpecificationAdjustable Angle, 30 ~ 270ºHeight (in) 6.0Width (in) 6.0Thick..

€29.95

The Third Hand – Holds, Bends, TwistsThe Snake Magnet gives you the flexibility to hold stock at odd angles. MFC318 - comes with 18” flex cable, 1 clamp, 2 flat Magnetic PadsSpecification18” flex cable, 1 clamp, 2 flat Magnetic PadsWeight (lb) 1.4..

€126.31

For professional jobs that demand strong hold down forces.Holds flat and round metal work pieces.Two On/Off switches for independent operation.Turn the magnets Off when setting up, turn On when you’re ready to work. Easy and safe set-up!Machined flat and V-surfaces are ideal for round and square tubing, angle, and flat stock.Max. Pull Force (lb) 120Dimensions (in) 6.0 x 6.0 x 1.5Weight (lb) 2.7..

€39.95

The fast & easy way to hold metal workpieces at 45°, and 90°.Turn the magnet Off or at the mid-point position when setting up, turn On when you’re ready to work. Fast and safe set-up!For brazing, soldering, welding and tacking! Ideal for round and square tubing, angle and flat stock.Ideal for round and square tubing, angle, and flat stock.Easy to clean. Simply turn Off and wipe.ON / OFF Switch for quick setup. Mid point switch position for alignment / easy part placement.Made with stron..

€69.95

The fast & easy way to hold metal workpieces at 45°, and 90°.Turn the magnet Off or at the mid-point position when setting up, turn On when you’re ready to work. Fast and safe set-up!For brazing, soldering, welding and tacking! Ideal for round and square tubing, angle and flat stock.Ideal for round and square tubing, angle, and flat stock.Easy to clean. Simply turn Off and wipe.ON / OFF Switch for quick setup. Mid point switch position for alignment / easy part placement.Made with stron..

€27.95

Create 90º corners by holding from the outside, providing you with an unobstructed area for inside tack welds.One side corner “relief” provides clearance for tall lips.Use the outer edges of the Corner Magnet for setting up materials at 60º.Dimension (in) 3.3 x 3.8 x 0.6Max. Pull Force (lb) 30Weight (lb) 0.9..

€28.95

Extremely versatile, the Stronghand Grasshopper Magnetic, is a seriously handy gadget to steady the work piece ready for welding.  Sometimes referred to as a welders third hand, the magnetic grasshopper uses a magnetic base to fasten to the workbench or workpiece and a spring loaded arm to hold the component / part in place.The magnet is ideal for positional work too. It can be used to hold tabs and parts to be tacked in the vertical and overhead positions rather than just flat.  Simpl..

€16.47

Mini Magnets at just 2-5/16″ in height provide low profile holding of stock in tight, hard to reach areas.Use as many as needed for light duty holding of stock at multiple points.Insert a screwdriver into the center hole to apply breakaway force.Full aluminum rim enclosure for easy cleaning.SpecificationAngles 30º/60º, 45º, 90ºMax. Pull Force (lb) 25Dimensions (in) 2.3 x 2.0 x 0.6Weight (lb) 0.6Twin Pack..

€21.95

Mini Magnets at just 2-5/16″ in height provide low profile holding of stock in tight, hard to reach areas.Use as many as needed for light duty holding of stock at multiple points.Insert a screwdriver into the center hole to apply breakaway force.Full aluminum rim enclosure for easy cleaning.SpecificationAngles 30º/60º, 45º, 90ºMax. Pull Force (lb) 25Dimensions (in) 2.3 x 2.0 x 0.6Weight (lb) 1.76 pack..

€18.95

Holding at multiple angles while soldering, brazing, and welding at 30º/60º, 45º, and 90º.Center hole for easy handling.Aluminum enclosed for easier cleaning.Angles 45º, 90ºMax. Pull Force (lb) 65Dimensions (in) 4.4 x 3.8 x 0.8Weight (lb) 1.0..

€17.95

This premium Magnetic Square Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. It will securely hold round and square tubing, angle, and flat stock. Ideal for use by welders and fabricators...

€9.95

Holds Material at  45º / 60º / 90º / 105º / 120º / 135º for easy welding or soldering.Fast positioning of a super-strong magnetic force saves time and effort.For all kinds of welding, soldering, making off, pipe installation, etc...

€7.69

Arrow Magnetic Welding Positioner Small 25LbsFor holding workpieces whilst soldering or welding. Working angles: 45°, 90° and 135°. Manufactured from high quality pressed and enameled steel with strong magnet.3 InchUsesWeldingSolderingAssemblyMarking-offPipe InstallationAs a floaterWith a crane..

€12.95

Arrow Magnetic Welding Holder Large 50LbsFor holding workpieces whilst soldering or welding. Working angles: 45°, 90° and 135°. Manufactured from high quality pressed and enameled steel with strong magnet.5 InchUsesWeldingSolderingAssemblyMarking-offPipe InstallationAs a floaterWith a crane..