€115.00

Heavy Duty Cutting Torch, Series Model 625. Head Angle 90amp730 and Torch length 450mm. Cuts up to 300mm steel and features reverse flow check valve. To be used for cutting and gouging applications. Simply change the tip for the required use. Low pressure torch for Acetylene and Hydrogen. Solid-forged head resists abuse and distortion. Fuel gas pressure as low as 0.15 bar. Heats and cuts fast and aids lower fuel gas consumption.Low pressure torch for Acetylene and HydrogenSolid-forged head resis..

€33.50

A 18/90 cutting torch for acetylene or propane cutting, using a nozzle mix process for cutting applications up to 30cm on mild steel...

€59.24

A 18/90 cutting torch for acetylene or propane cutting, using a nozzle mix process for cutting applications up to 30cm on mild steel...

€72.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€79.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€122.64

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€104.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€146.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€104.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€115.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€221.00

Designed for oxy/fuel gas cutting of steel up to 30mm thickness using oxygen with either acetylene or propane as a fuel gas. 3/8"BSP hose connection...

€17.05

Allows diameters of up to two times the length of the gas tubes to be cut simply and easily. High quality brass body and screws with chrome plated steel centre pin...

€55.35

Fits onto the nozzle end of the blowpipe, between the head and the cutting nozzle. Offers optimum two-handed control, fitted with a sliding centre device and a roller ball support spigot, ideal for accurately cutting larger diameters. Swing arm is graduated for direct reading of circle diameter (2 x radius). High quality brass head and screws with chrome plated steel swing arm and centre slide...