Makita P-44046 Mixed Accessory Kit, 216 Piece

The Makita P-44046 216 Piece Mixed Accessory Kit is a thoroughly proven kit that represents outstanding value for money. Supplied in a handy, plastic fold out case. Contains:

13 x 25mm Phillips Bits: PH0(3), PH1(3), PH2(4) & PH3(3)
7 x 25mm Pozi Bits: PZ0, PZ1(2), PZ2(2) & PZ3(2)
9 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX35, TX40 & TX45
6 x 25mm Hex Bits: 3, 4, 5, 6, 7 & 8mm
4 x 25mm Square Bits: 1, 2, 3 & 4
14 x 25mm Slotted Bits: 3(2), 4(2), 5(2), 5.5(2), 6(2), 7(2) & 8mm(2)

13 x 50mm Phillips Bits: PH0(3), PH1(3), PH2(4) & PH3(3)
8 x 50mm Pozi Bits: PZ0(2), PZ1(2), PZ2(2) & PZ3(2)
8 x 50mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX40 & TX45
6 x 50mm Hex Bits: 3, 4, 5, 6, 7 & 8mm
17 x 50mm Slotted Bits: 3(2), 4(3), 5(3), 6(3), 7(3) & 8mm(3)

5 x Flat Bits: 10, 12, 16, 20 & 22mm
2 x Long Flat Bits (300mm): 12 & 14mm
11 x Masonry Drill Bits: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9 & 10mm
2 x Long Masonry Drill Bits (300mm): 8 & 10mm
8 x Brad Point Drill Bits: 4(2), 5, 6, 7, 8, 9 & 10mm
42 x HSS Drill Bits: 1(4), 1.5(4), 2(5), 2.5(5), 3(5), 3.2(4), 3.5(4), 4(5), 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9 & 10mm

10 x Metric Nut Drivers: 5, 5.5, 6, 7, 8, 9, 10, 11, 12 & 13mm
10 x Imperial Nut Drivers: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2in

4 x Holesaws: 32, 38, 44 & 54mm
1 x Holesaw Arbor

3 x Depth Gauges: 3, 5 & 6mm
1 x Allen Key 2.5mm
1 x Countersink
1 x 3.5m Measuring Tape
1 x Spirit Level 200mm (8in)
1 x Magnetic T-shaped Screwdriver Handle
2 x Pencils
1 x Flexible Drive
2 x Nail Sets (1.5, 2.5mm)
1 x Magnetic Bit Driver, Snap On Handle