€35.42

with magnets for firm grip on vicefor gentle clamping2 longitudinal profile jaws for clamping e.g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and boltsmade of aluminumsize: 100 x 25 mm Gross weight 728 g..

€39.36

with magnets for firm grip on vicefor gentle clampingmade of aluminumsize: 125 x 25 mmscope of delivery:2 longitudinal profile jaws for clamping e. g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and bolts1 tetron wallet Gross weight 868 g..

€45.26

with magnets for firm grip on vicefor gentle clampingmade of aluminumsize: 150 x 25 mmscope of delivery:2 longitudinal profile jaws for clamping e. g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and bolts1 tetron wallet Gross weight 1020 g..

€7.48

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith plastic cover (red) Width 100 mm Gross weight 156 g Packaging suitable for wall hanging Yes..

€7.48

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith longitudinal profile Width 100 mm Gross weight 166 g Packaging suitable for wall hanging Yes..

€7.48

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith V-profile Width 100 mm Gross weight 146 g Packaging suitable for wall hanging Yes..

€7.48

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith rubber pad Width 100 mm Gross weight 166 g Packaging suitable for wall hanging Yes..

€17.71

allows gentle clamping of sensitive workpiecesembedded magnetic stripe for holding the protection on bench vicehorizontally and vertically V-shaped profile Gross weight 180 g Packaging suitable for wall hanging Yes..

€8.27

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith plastic cover (red) Width 125 mm Gross weight 206 g Packaging suitable for wall hanging Yes..

€11.71

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith plastic coating Gross weight 228 g Packaging suitable for wall hanging Yes..

€16.73

allows gentle clamping ofsensitive workpiecesembedded magnetic stripe for holdingthe protection on bench vice Gross weight 210 g Packaging suitable for wall hanging Yes..

€19.68

allows gentle clamping ofsensitive workpiecesembedded magnetic stripe for holding the protection on bench vicehorizontally and vertically V-shaped profile Gross weight 216 g Packaging suitable for wall hanging Yes..

€18.70

allows gentle clamping ofsensitive workpiecesembedded magnetic stripe for holdingthe protection on bench vice Gross weight 254 g Packaging suitable for wall hanging Yes..

€8.66

allows gentle clamping of sensitive workpieces such as aluminium, copper, etc.embedded magnetic stripe for holding the protector on bench vicewith plastic cover (red) Gross weight 228 g Packaging suitable for wall hanging Yes..

€13.68

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicewith plastic coating Gross weight 278 g Packaging suitable for wall hanging Yes..

€4.72

allows gentle clamping of sensitive workpieces such as aluminium, copper, etc.with magnetic stripe for holding the jaw protector on bench vicehorizontally and vertically V-shaped profile Width 100 mm Gross weight 74 g Material Plastic Packaging suitable for wall hanging Yes..

€5.31

allows gentle clamping of sensitive workpieces such as aluminium, cooper, etc.embedded magnetic stripe for holding the protection on bench vicehorizontally and vertically V-shaped profile Gross weight 96 g Packaging suitable for wall hanging Yes..

€55.35

parallel bench vice with anvilmade from cast ironopening to the front sideanvil surface suitable for straightening and upsetting workthreaded spindle covered and protected against dirtwith hardened and roughened clamping jawspre-drilled holes for installation on a workbenchmax. opening: 100 mm Jaw width 100 mm Gross weight 5004 g..

€157.36

for safe clamping of workpiecesensures safe and non-slip workcan be easily fixed on the workbench by 4 existing drill holesopens to the frontwith turntable360..

€89.54

2 mounting holes Ø 8 mm, 95 mm hole distancescrewed jaws Gross weight 6262 g Length 320 mm Max. clamping width 100 mm..

€84.87

parallel bench vice with anvilmade from cast ironopening to the front sideanvil surface suitable for straightening and upsetting workthreaded spindle covered and protected against dirtwith hardened and roughened clamping jawspre-drilled holes for installation on a workbenchmax. opening: 125 mm Jaw width 125 mm Gross weight 8384 g..

€109.42

2 mounting holes Ø 8 mm, 107 mm hole distancescrewed jaws Gross weight 10014 g Length 375 mm Max. clamping width 130 mm..

€119.31

parallel bench vice with anvilmade from cast ironopening to the front sideanvil surface suitable for straightening and upsetting workthreaded spindle covered and protected against dirtwith hardened and roughened clamping jawspre-drilled holes for installation on a workbenchmax. opening: 150 mm Jaw width 150 mm Gross weight 10820 g..

€72.82

2 mounting holes Ø 8 mm, 83 mm hole distancescrewed jaws Gross weight 4224 g Length 255 mm Max. clamping width 75 mm..

€50.43

parallel bench vice with anvilmade from cast ironopening to the front sideanvil surface suitable for straightening and upsetting workthreaded spindle covered and protected against dirtwith hardened and roughened clamping jawspre-drilled holes for installation on a workbenchmax. opening: 80 mm Jaw width 80 mm Gross weight 4946 g..

€5.51

Gross weight 253 g..

€2.36

Gross weight 120 g..

€34.42

with vacuum suction base for quick attachment to smooth surfacesideal when space is limited in the laboratory and for smaller mechanical tasksalso suitable for tinkering or repair workpractical ball joint and removable rubber protection jaws round off the versatilitythe ball-and-socket joint allows the vice to be continuously adjusted 360..

€30.50

Rotatable 360..